Description
Key FeaturesWeight:High|Score:93%One-Tap Self CheckK1 will perform a self check and send notification when problem detectedHands-Free Auto LevelingK1 will adjust the build plate to a perfect leveling surface before printing startsNo Nozzle ClogsWith our new ceramic heater, K1 Hotend works smoothly with flying colors in up to 300°CQuick Heating before PrintingK1 rapidly heats its heatbed to reach 60℃ in a mere 180 seconds, ensuring swift and efficient printing preparation.All Around CoolingOur dual-Fan technology ensures the model hardens before any stringing and warping could happen. It allows support-free bridges and overhangs.Real Time MonitoringK1 will send notification once there are any problem detected during printing.No Ghosting & RingingA G-sensor in the printhead measures the resonance frequencies of high-speed printing, and auto-tune the printer to mitigate it.Easy RemovalEasily remove your model with our flexible and heat-resistant plateSmart NotificationStay informed and connected with K1 as it sends instant notifications to your phone or tablet once the printing process is completed.Q & A:1. What is the build volume of the Creality K1 3D Printer? A: The build volume of the K1 is expected to be 220 x 200 x 250mm with the K1 Max expected to be 300 x 300 x 300mm.2. How much faster is the K1 compared to a standard 3D printer? A: The Creality K1 is 12x faster than a standard Fused Deposition Modeling 3D printer boasting print speeds of up to 600mm/s. This reduces printing times and enhances overall efficiency. 3. What materials is the Creality K1 compatible with? A: This printer can print with an extensive range of filaments like ABS, PLA, TPU, PET, PETG, PA (Nylon), ASA, PC (Polycarbonate), PLA-CF (Carbon Fiber Reinforced PLA), PA-CF (Carbon Fiber Reinforced PA), and PET-CF (Carbon Fiber Reinforced PET). 4. What slicing software is the Creality K1 compatible with? A: Creality Print; compatible with Cura, Simplify3D, PrusaSlicer.Specification:Printing Technology: Fused Deposition ModelingBuild Volume: 220*220*250mmPrinting Speed: ≤600mm/sAcceleration: ≤20000mm/s²Printing Accuracy: 100±0.1mmLayer Height: 0.1-0.35mmFilament Diameter: 1.75mmNozzle Diameter: 0.4mm(compatible with 0.6/0.8mm)Nozzle Temperature: ≤300℃Heatbed Temperature: ≤100℃Build Surface: Flexible build plateLeveling Mode: Hands-free auto levelingExtruder: Dual-gear direct drive extruderDisplay Screen: 4.3″ color touch screenAI Camera: OptionalAI Li-DAR: OptionalPower Loss Recovery: YesFilament Run-out Sensor: YesInput Shaping: YesLighting Kit: YesSleep Mode: YesSupported Filaments: ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CFRated Voltage: 100-120V~, 200-240V~, 50/60HzRated Power: 350WFile Transfer: USB drive, WiFiPrintable File Format: G-CodeSlicing Software: Creality Print: compatible with Cura, Simplify3D, PrusaSlicerFile Formats for Slicing: STL, OBJ, AMFUI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, ChineseProduct Dimensions: 355*355*480mmProduct Weight: 12.5kgPackage Dimensions: 415*415*550mmGross Weight: 16kg One-Tap Self CheckK1 will perform a self check and send notification when problem detected Hands-Free Auto LevelingK1 will adjust the build plate to a perfect leveling surface before printing starts No Nozzle ClogsWith our new ceramic heater, K1 Hotend works smoothly with flying colors in up to 300°C Quick Heating before PrintingK1 rapidly heats its heatbed to reach 60℃ in a mere 180 seconds, ensuring swift and efficient printing preparation. All Around CoolingOur dual-Fan technology ensures the model hardens before any stringing and warping could happen. It allows support-free bridges and overhangs. Real Time MonitoringK1 will send notification once there are any problem detected during printing. No Ghosting & RingingA G-sensor in the printhead measures the resonance frequencies of high-speed printing, and auto-tune the printer to mitigate it. Easy RemovalEasily remove your model with our flexible and heat-resistant plate Smart NotificationStay informed and connected with K1 as it sends instant notifications to your phone or tablet once the printing process is completed. Q & A:1. What is the build volume of the Creality K1 3D Printer? A: The build volume of the K1 is expected to be 220 x 200 x 250mm with the K1 Max expected to be 300 x 300 x 300mm.2. How much faster is the K1 compared to a standard 3D printer? A: The Creality K1 is 12x faster than a standard Fused Deposition Modeling 3D printer boasting print speeds of up to 600mm/s. This reduces printing times and enhances overall efficiency. 3. What materials is the Creality K1 compatible with? A: This printer can print with an extensive range of filaments like ABS, PLA, TPU, PET, PETG, PA (Nylon), ASA, PC (Polycarbonate), PLA-CF (Carbon Fiber Reinforced PLA), PA-CF (Carbon Fiber Reinforced PA), and PET-CF (Carbon Fiber Reinforced PET). 4. What slicing software is the Creality K1 compatible with? A: Creality Print; compatible with Cura, Simplify3D, PrusaSlicer. Specification:Printing Technology: Fused Deposition ModelingBuild Volume: 220*220*250mmPrinting Speed: ≤600mm/sAcceleration: ≤20000mm/s²Printing Accuracy: 100±0.1mmLayer Height: 0.1-0.35mmFilament Diameter: 1.75mmNozzle Diameter: 0.4mm(compatible with 0.6/0.8mm)Nozzle Temperature: ≤300℃Heatbed Temperature: ≤100℃Build Surface: Flexible build plateLeveling Mode: Hands-free auto levelingExtruder: Dual-gear direct drive extruderDisplay Screen: 4.3″ color touch screenAI Camera: OptionalAI Li-DAR: OptionalPower Loss Recovery: YesFilament Run-out Sensor: YesInput Shaping: YesLighting Kit: YesSleep Mode: YesSupported Filaments: ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CFRated Voltage: 100-120V~, 200-240V~, 50/60HzRated Power: 350WFile Transfer: USB drive, WiFiPrintable File Format: G-CodeSlicing Software: Creality Print: compatible with Cura, Simplify3D, PrusaSlicerFile Formats for Slicing: STL, OBJ, AMFUI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, ChineseProduct Dimensions: 355*355*480mmProduct Weight: 12.5kgPackage Dimensions: 415*415*550mmGross Weight: 16kg






Reviews
There are no reviews yet.